ZTAG-D Single-use temperature indicator
●This product has an LCD display screen, which can view the current monitoring data in real time
● adopts food-grade composite bags, which are completely waterproof. After a key is activated, it can be placed in the target monitoring environment to monitor the temperature status of fresh food, medicine and other products during storage and transportation.
● is widely used in all aspects of warehousing and logistics cold chain, such as refrigerated containers, refrigerated trucks, refrigerated bags, cold storage, laboratories, etc.
Single-Use Temperature Indicator
Wide measuring range Configuration method Display mode High precision
-30℃-70℃ Factory preset parameters ndustrial grade LCD display Built-in high-precision NTC sensor
One-click start, simple and easy to use
Parameters are pre-configured before leaving the factory, and trip data can
be recorded with one click. It is simple and easy to use.
Ultra wide angle display
Using ultra-wide-angle industrial-grade LCD, you can clearly view the
current recorded information from any viewing angle.
Air Freight Compliance
Complies with RTCA/DO-160G environmental conditions and test
procedures for airborne equipment, qualified for air shipment in active status.
technical parameters
| LED indicator | green (recording, normal), red (overtemperature alarm), yellow (start delay) |
| battery life | up to 180 days (shelf life 2 years) |
| Measurement range | -30 ℃ ~ 70 ℃ |
| measurement accuracy | ± 0.5°C |
| resolution | 0.1°C |
| alarm point | can set 4 high and low alarm points (alarm threshold and over-temperature trigger time can be customized according to customer needs) |
| recording interval | 1 minute -24 hours (can be factory configuration) default 5 minutes |
| storage capacity | maximum 33000 |
| startup delay | 0 minutes -24 hours (can be configured before factory) default 10 minutes) |
| Start Mode | Manual Start |
| protection level | IP68 |
| Battery Type | 3.0V CR2032 |
| packing method | food grade compound bag |
| Product Certification | CE,EN12830:2018,RTCA/DO-160G (Aviation Safety Directive),RoHS, factory sampling 3-point calibration (AQL 0.25) |
